If you live in an area that is prone to high winds, you should think carefully about the materials you are going to use to cover your roof. The wrong roofing material can quickly be blown off the roof in a high wind event, leaving your home susceptible to damage and leading to expensive repairs. On the other hand, the right material can give you a great chance of coming through the high winds without any damage to your home. Fortunately, there are at least three options which are particularly well-suited for the job of protecting homes where high winds are a factor – especially for roofing in Frederick and other areas of central Maryland!
When you are ready to pick out a roofing material for your home in a high wind area, be sure to keep the following three options in mind.
You are certainly familiar with shingles as a roofing material, as they are one of the most popular choices in the world. Fiberglass shingles are a particularly good choice in high wind areas, as they are a strong product which is unlikely to come apart. Not only is it important to pick a good product like a quality fiberglass shingle, but you also need to be sure that those shingles are installed properly. Many roofing problems develop not because of poor materials but rather due to poor craftsmanship. Installing shingles in accordance with the manufacturer’s recommendations is the best way to receive optimum performance from the product.
Metal roofing is not used as commonly in residential applications as shingles, but it is a smart choice for high wind regions. When installed correctly, metal does a great job of keeping water out of the house, and it will hold up quite well against high winds. Many metal roof designs have a limited number of seams and overlaps, meaning there are few places for the wind to get in and cause havoc. As long as your metal roof has been installed correctly, and it is then maintained correctly as well, it should do well when faced with high wind speeds.
There is a lot to like about using clay tiles for your roof, although they might not be the first thing you think of when roofing in a high wind area. After all, a clay tile that gets loose and is blown off of the roof can create a dangerous situation. However, if your clay tiles are installed correctly, they should remain secure for years to come. When clay tiles are used in a windy area, it is typically best to secure them to the roof deck with a foam adhesive. This adhesive will help to prevent the tile from flying away, meaning you can enjoy long-lasting performance from this type of roof. If you do go with clay roofing, you will enjoy a number of non-wind related advantages, such as energy efficiency, visual appeal, and water resistance.